Hoton da aka Fitar na'urar jigilar taki ta sukurori

Na'urar Taki Sukurori

Amfani: Isarwa kayan aiki don layin samarwa
Diamita na dunƙule:160-400 mm
Yawan sufuri:1-85.3 m³/h
Saurin juyawa:36-112 r/min
Kayan da suka dace:Kayan takin zamani na NPK ko takin gargajiya

Sami ƙiyasin farashi

+8618937171932

Cikakken Bayani game da Samfurin

Alamun Samfura

Bayanin Samfurin

Na'urar jigilar sukurori tana amfani da silinda mai ɗaukar bututun ƙarfe, wanda ke da ƙarfi sosai, ingantaccen aikin rufewa, babu ɓuɓɓuga, kuma yana inganta yanayin aiki.

Na'urar watsawa tana amfani da na'urar rage gudu ta cycloidal pinwheel da ke haɗa kai tsaye da injin, wadda ke da ƙarfi mai yawa, ƙarancin hayaniya, ƙaramin tsari da kuma ingantaccen watsawa. Ana iya shigar da dukkan injin a kwance ko a kwance, tare da ƙananan sawun ƙafa, sauƙin shigarwa da sauƙin amfani.

Bayanan Cikakkun Bayanai

1. Na'urar jigilar sukurori nau'in da ba ta da tushe. An haɗa ta da na'urar injin da aka haɗa da bututun casing, kuma haɗin sukurori yana haɗuwa da juna bi da bi, kuma an haɗa shi zuwa cikakken saitin kayan aiki, wanda yake da matuƙar dacewa don motsawa, wargazawa da haɗawa.

2. An haɗa haɗakar sukurori da ƙarshen shaft ta hanyar splines, wanda yake da sauƙin haɗawa da wargazawa, yana da babban ƙarfin ɗaukar kaya, mai kyau tsaka tsaki, kuma amintacce ne kuma abin dogaro.

3. Aikin rufewa yana da kyau, harsashin an yi shi ne da bututun ƙarfe mara sulɓi, kuma kowane ƙarshen an haɗa shi da flanges, injin gaba ɗaya ba shi da zubar ƙura, kuma babu ɗayansu da ke ɓatar da kayan aiki, don ƙirƙirar kyakkyawan yanayin aiki da kuma biyan buƙatun kariyar muhalli.

4. Ƙaramin girma, babban gudu, sautuka masu canzawa, don tabbatar da isarwa cikin sauri da daidaito.

5. Ana iya yin tashar ciyarwa zuwa kusurwar da ake buƙata bisa ga yanayin wurin aiki, kuma ana iya haɗa ta da flange, haɗin jaka da flange na haɗin gwiwa na duniya, wanda masu amfani za su iya zaɓar su bisa ga buƙatunsu.

Sigogi na Fasaha

Samfuri	Diamita mai karkace (mm)	Gudun juyawa (r/min)	Isarwa mai girma (m3/h)
LS160	160	112	9.7-3.2
		90	7.8-2.6
		71	6.2-2.1
		56**	4.9-1.6
LS200	200	100	16.9-5.6
		80	13.5-4.5
		63	10.7-3.6
		50**	8.5-2.8
LS250	250	90	29.9-9.9
		71	23.5-7.8
		56**	18.5-6.2
		45**	14.9-5.0
LS315	315	80	52.9-17.6
		63	41.6-13.9
		50**	33.1-11.0
		40**	26.4-8.8
LS400	400	71	85.3-28.2
		56	67.3-22.4
		45**	54.1-18
		36**	43.2-14.4